breakdown voltage: 6.8 to 600 v peak pulse power: 600 w except bipolar mounting position: any lead: solderable per mil-std-750, method 2026 polarity: color band denotes cathode end mechanical data case: molded plastic epoxy: ul 94v-0 rate flame retardant 600 w peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle):0.01 % low leakage uni and bidirectional unit excellent clamping capability very fast response time rohs compliant p6smb series transient voltage suppressors features smb/ do-214aa glass passivated chip note: (3)v f <3.5v for devices of v br <200v and v f <5.0v for devices of v br >201v (1)non-repetitive current pulse per fig.5 and derated above t a = 25 c per fig.1 (2)measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum maximum instantaneous forward voltage at 25 a for unidirectional only (3) v f 3.5/5.0 v operating junction and storage temperature range t j , t stg ?55 to +150 c power dissipation on infinite heatsink at t l = 75 c p d 5.0 w peak forward surge current, 8.3 ms single half sine- wave unidirectional only (2) i fsm 100 a peak power dissipation with a 10/1000 s waveform (1) p pp 600 w peak pulse current wih a 10/1000 s waveform (1) i pp see next table a maximum ratings(t a =25 w unless otherwise noted) parameter s y mbol value unit ht t p : // w w w.lgesemi .c o m m a il:lge@lgesemi.com revision:201 70301 -p1 breakdown voltage: 6.8 to 600 v peak pulse power: 600 w except bipolar mounting position: any lead: solderable per mil-std-750, method 2026 polarity: color band denotes cathode end mechanical data case: molded plastic epoxy: ul 94v-0 rate flame retardant 600 w peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle):0.01 % low leakage uni and bidirectional unit excellent clamping capability very fast response time rohs compliant p6smb series surface mount transient voltage suppressors features smb/ do-214aa glass passivated chip note: (3)v f <3.5v for devices of v br <200v and v f <5.0v for devices of v br >201v (1)non-repetitive current pulse per fig.5 and derated above t a = 25 c per fig.1 (2)measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum maximum instantaneous forward voltage at 25 a for unidirectional only (3) v f 3.5/5.0 v operating junction and storage temperature range t j , t stg ?55 to +150 c power dissipation on infinite heatsink at t l = 75 c p d 5.0 w peak forward surge current, 8.3 ms single half sine- wave unidirectional only (2) i fsm 100 a peak power dissipation with a 10/1000 s waveform (1) p pp 600 w peak pulse current wih a 10/1000 s waveform (1) i pp see next table a maximum ratings(t a =25 w unless otherwise noted) parameter s y mbol value unit
uni bi min (v) max (v) i t (ma) p6smb6.8a p6smb6.8ca 6v8a 6v8c 6.46 7.14 10 1000 5.8 57.14 10.5 p6smb7.5a p6smb7.5ca 7v5a 7v5c 7.13 7.88 10 500 6.4 53.10 11.3 p6smb8.2a p6smb8.2ca 8v2a 8v2c 7.79 8.61 10 200 7.0 49.59 12.1 p6smb9.1a p6smb9.1ca 9v1a 9v1c 8.65 9.56 1 50 7.8 44.78 13.4 p6smb10a p6smb10ca 10a 10c 9.50 10.50 1 10 8.6 41.38 14.5 p6smb11a p6smb11ca 11a 11c 10.45 11.55 1 5 9.4 38.46 15.6 p6smb12a p6smb12ca 12a 12c 11.40 12.60 1 5 10.2 35.93 16.7 p6smb13a p6smb13ca 13a 13c 12.35 13.65 1 1 11.1 32.97 18.2 p6smb15a p6smb15ca 15a 15c 14.25 15.75 1 1 12.8 28.30 21.2 p6smb16a p6smb16ca 16a 16c 15.20 16.80 1 1 13.6 26.67 22.5 p6smb18a p6smb18ca 18a 18c 17.10 18.90 1 1 15.3 23.81 25.2 p6smb20a p6smb20ca 20a 20c 19.00 21.00 1 1 17.1 21.66 27.7 p6smb22a p6smb22ca 22a 22c 20.90 23.10 1 1 18.8 19.61 30.6 p6smb24a p6smb24ca 24a 24c 22.80 25.20 1 1 20.5 18.07 33.2 p6smb27a p6smb27ca 27a 27c 25.65 28.35 1 1 23.1 16.00 37.5 p6smb30a p6smb30ca 30a 30c 28.50 31.50 1 1 25.6 14.49 41.4 p6smb33a p6smb33ca 33a 33c 31.35 34.65 1 1 28.2 13.13 45.7 p6smb36a p6smb36ca 36a 36c 34.20 37.80 1 1 30.8 12.02 49.9 p6smb39a p6smb39ca 39a 39c 37.05 40.95 1 1 33.3 11.13 53.9 p6smb43a p6smb43ca 43a 43c 40.85 45.15 1 1 36.8 10.12 59.3 p6smb47a P6SMB47CA 47a 47c 44.65 49.35 1 1 40.2 9.26 64.8 p6smb51a p6smb51ca 51a 51c 48.45 53.55 1 1 43.6 8.56 70.1 p6smb56a p6smb56ca 56a 56c 53.20 58.80 1 1 47.8 7.79 77.0 p6smb62a p6smb62ca 62a 62c 58.90 65.10 1 1 53.0 7.06 85.0 p6smb68a p6smb62ca 68a 68c 64.60 71.40 1 1 58.1 6.52 92.0 p6smb75a p6smb75ca 75a 75c 71.25 78.75 1 1 64.1 5.83 103.0 p6smb82a p6smb82ca 82a 82c 77.90 86.10 1 1 70.1 5.31 113.0 p6smb91a p6smb91ca 91a 91c 86.45 95.55 1 1 77.8 4.80 125.0 p6smb100a p6smb100ca 100a 100c 95.00 105.00 1 1 85.5 4.38 137.0 p6smb110a p6smb110ca 110a 110c 104.50 115.50 1 1 94.0 3.95 152.0 p6smb120a p6smb120ca 120a 120c 114.00 126.00 1 1 102.0 3.64 165.0 p6smb130a p6smb130ca 130a 130c 123.50 136.50 1 1 111.0 3.35 179.0 p6smb150a p6smb150ca 150a 150c 142.50 157.50 1 1 128.0 2.90 207.0 p6smb160a p6smb160ca 160a 160c 152.00 168.00 1 1 136.0 2.74 219.0 p6smb170a p6smb170ca 170a 170c 161.50 178.50 1 1 145.0 2.56 234.0 p6smb180a p6smb180ca 180a 180c 171.00 189.00 1 1 154.0 2.44 246.0 p6smb200a p6smb200ca 200a 200c 190.00 210.00 1 1 171.0 2.19 274.0 p6smb220a p6smb220ca 220a 220c 209.00 231.00 1 1 185.0 1.83 328.0 p6smb250a p6smb250ca 250a 250c 237.50 262.50 1 1 214.0 1.74 344.0 p6smb300a p6smb300ca 300a 300c 285.00 315.00 1 1 256.0 1.45 414.0 p6smb350a p6smb350ca 350a 350c 332.50 367.50 1 1 299.3 1.24 482.0 p6smb380a p6smb380ca 380a 380c 361.00 399.00 1 1 324.9 1.14 524.4 p6smb400a p6smb400ca 400a 400c 380.00 420.00 1 1 342.0 1.09 548.0 p6smb440a p6smb440ca 440a 440c 418.00 462.00 1 1 376.2 0.99 607.2 p6smb500a p6smb500ca 500a 500c 475.00 525.00 1 1 427.5 0.87 690.0 p6smb520a p6smb520ca 520a 520c 494.00 546.00 1 1 444.6 0.84 717.6 p6smb550a p6smb550ca 550a 550c 522.50 577.50 1 1 470.3 0.79 759.0 p6smb600a p6smb600ca 600a 600c 570.00 630.00 1 1 513.0 0.72 828.0 note: 1. the available parts are "a" type only,the parts without a(v br is 10%) is not available 2. add suffix 'c 'or ' ca ' after part number to specify bi-directional devices 3. for bi-directional devices having v r of 10 volts and under, the i r limit is double electrical characteristics(t a =25 w unless otherwise noted) part number (uni) part number (bi) device marking code breakdown voltage v br @i t maximum reverse leakage i r @v rwm (ua) working peak reverse voltage v rwm (v) maximum reverse surge current i pp (a) maximum clamping voltage v c @i pp (v) p6smb series transient voltage suppressors ht t p : // w w w.lgesemi .c o m m a il:lge@lgesemi.com revision:201 70301 -p1 uni bi min (v) max (v) i t (ma) p6smb6.8a p6smb6.8ca 6v8a 6v8c 6.46 7.14 10 1000 5.8 57.14 10.5 p6smb7.5a p6smb7.5ca 7v5a 7v5c 7.13 7.88 10 500 6.4 53.10 11.3 p6smb8.2a p6smb8.2ca 8v2a 8v2c 7.79 8.61 10 200 7.0 49.59 12.1 p6smb9.1a p6smb9.1ca 9v1a 9v1c 8.65 9.56 1 50 7.8 44.78 13.4 p6smb10a p6smb10ca 10a 10c 9.50 10.50 1 10 8.6 41.38 14.5 p6smb11a p6smb11ca 11a 11c 10.45 11.55 1 5 9.4 38.46 15.6 p6smb12a p6smb12ca 12a 12c 11.40 12.60 1 5 10.2 35.93 16.7 p6smb13a p6smb13ca 13a 13c 12.35 13.65 1 1 11.1 32.97 18.2 p6smb15a p6smb15ca 15a 15c 14.25 15.75 1 1 12.8 28.30 21.2 p6smb16a p6smb16ca 16a 16c 15.20 16.80 1 1 13.6 26.67 22.5 p6smb18a p6smb18ca 18a 18c 17.10 18.90 1 1 15.3 23.81 25.2 p6smb20a p6smb20ca 20a 20c 19.00 21.00 1 1 17.1 21.66 27.7 p6smb22a p6smb22ca 22a 22c 20.90 23.10 1 1 18.8 19.61 30.6 p6smb24a p6smb24ca 24a 24c 22.80 25.20 1 1 20.5 18.07 33.2 p6smb27a p6smb27ca 27a 27c 25.65 28.35 1 1 23.1 16.00 37.5 p6smb30a p6smb30ca 30a 30c 28.50 31.50 1 1 25.6 14.49 41.4 p6smb33a p6smb33ca 33a 33c 31.35 34.65 1 1 28.2 13.13 45.7 p6smb36a p6smb36ca 36a 36c 34.20 37.80 1 1 30.8 12.02 49.9 p6smb39a p6smb39ca 39a 39c 37.05 40.95 1 1 33.3 11.13 53.9 p6smb43a p6smb43ca 43a 43c 40.85 45.15 1 1 36.8 10.12 59.3 p6smb47a P6SMB47CA 47a 47c 44.65 49.35 1 1 40.2 9.26 64.8 p6smb51a p6smb51ca 51a 51c 48.45 53.55 1 1 43.6 8.56 70.1 p6smb56a p6smb56ca 56a 56c 53.20 58.80 1 1 47.8 7.79 77.0 p6smb62a p6smb62ca 62a 62c 58.90 65.10 1 1 53.0 7.06 85.0 p6smb68a p6smb62ca 68a 68c 64.60 71.40 1 1 58.1 6.52 92.0 p6smb75a p6smb75ca 75a 75c 71.25 78.75 1 1 64.1 5.83 103.0 p6smb82a p6smb82ca 82a 82c 77.90 86.10 1 1 70.1 5.31 113.0 p6smb91a p6smb91ca 91a 91c 86.45 95.55 1 1 77.8 4.80 125.0 p6smb100a p6smb100ca 100a 100c 95.00 105.00 1 1 85.5 4.38 137.0 p6smb110a p6smb110ca 110a 110c 104.50 115.50 1 1 94.0 3.95 152.0 p6smb120a p6smb120ca 120a 120c 114.00 126.00 1 1 102.0 3.64 165.0 p6smb130a p6smb130ca 130a 130c 123.50 136.50 1 1 111.0 3.35 179.0 p6smb150a p6smb150ca 150a 150c 142.50 157.50 1 1 128.0 2.90 207.0 p6smb160a p6smb160ca 160a 160c 152.00 168.00 1 1 136.0 2.74 219.0 p6smb170a p6smb170ca 170a 170c 161.50 178.50 1 1 145.0 2.56 234.0 p6smb180a p6smb180ca 180a 180c 171.00 189.00 1 1 154.0 2.44 246.0 p6smb200a p6smb200ca 200a 200c 190.00 210.00 1 1 171.0 2.19 274.0 p6smb220a p6smb220ca 220a 220c 209.00 231.00 1 1 185.0 1.83 328.0 p6smb250a p6smb250ca 250a 250c 237.50 262.50 1 1 214.0 1.74 344.0 p6smb300a p6smb300ca 300a 300c 285.00 315.00 1 1 256.0 1.45 414.0 p6smb350a p6smb350ca 350a 350c 332.50 367.50 1 1 299.3 1.24 482.0 p6smb380a p6smb380ca 380a 380c 361.00 399.00 1 1 324.9 1.14 524.4 p6smb400a p6smb400ca 400a 400c 380.00 420.00 1 1 342.0 1.09 548.0 p6smb440a p6smb440ca 440a 440c 418.00 462.00 1 1 376.2 0.99 607.2 p6smb500a p6smb500ca 500a 500c 475.00 525.00 1 1 427.5 0.87 690.0 p6smb520a p6smb520ca 520a 520c 494.00 546.00 1 1 444.6 0.84 717.6 p6smb550a p6smb550ca 550a 550c 522.50 577.50 1 1 470.3 0.79 759.0 p6smb600a p6smb600ca 600a 600c 570.00 630.00 1 1 513.0 0.72 828.0 note: 1. the available parts are "a" type only,the parts without a(v br is 10%) is not available 2. add suffix 'c 'or ' ca ' after part number to specify bi-directional devices 3. for bi-directional devices having v r of 10 volts and under, the i r limit is double electrical characteristics(t a =25w unless otherwise noted) part number (uni) part number (bi) device marking code breakdown voltage v br @i t maximum reverse leakage i r @v rwm (ua) working peak reverse voltage v rwm (v) maximum reverse surge current i pp (a) maximum clamping voltage v c @i pp (v)
ambie n average forward current, (a) 0 100 1 100 25 100 100 22 150 0 0 5 0.1 30 73 5 10000 0.22 ## 0 ratings and charact eristics curves (t a =25 w unless otherwise noted) fig. 1 - pulse derating curve fig. 2 - maximum non-repetitive surge current 1.0 2.0 3.0 4.0 5.0 steady state power dissipation, (w) 0 20 40 60 80 100 1 10 100 peak forward surge current, (a) number of cycles at 60 hz t j = t j max. 8.3 ms single half sine-wave 0 25 50 75 100 0 25 50 75 100 125 150 175 200 peak pulse derating in percentage of peak power or current, (%) ambient temperature ,t a ( w ) 1 10 100 peak power (kw) 6 561 0 0 5111 81 0.2 100 6 561 0.5 76 3911 51 1 50 6 561 1.5 33 3611 8 2 23 6 561 3 13 3111 21 4 10 fig. 5 - pulse waveform fig. 6 - typical junction capacitance fig. 3 - steady state power derating curve fig. 4 - peak pulse power rating curve 1 10 100 1000 10000 1 10 100 1000 junction capacitance,c j (pf) reverse breakdown voltage,v br (v) bi-directional @v rwm uni-directional @v rwm t j =25 c f=1.0mhz 0.0 0 25 50 75 100 125 150 175 200 lead temperature , t l ( w ) 0 50 100 0 1 2 3 4 peak pulse current , (% ) time , (ms) t j = 25 c pulse width (td) is defined as the point where the peak current decays to 50 % of ipp 10/1000 sec. waveform as defined by r.e.a. peak value (ipp) half value = ipp 2 td tr=10 s bi-directional @zero bias uni-directional @zero bias 0.1 0.1 1 10 100 1000 10000 pulse width ,t d ( s) p6smb series transient voltage suppressors ht t p : // w w w.lgesemi .c o m m a il:lge@lgesemi.com revision:201 70301 -p1 pa c kage spq/p cs c a r t on spq/p cs c a r t on si z e/ cm c a r t on g w /kg c a r t on n w /kg s mb 3000 / r eel 48000 36 x 35 . 8 x 36 .5 12 . 00 11 . 00 ambie n average forward current, (a) 0 100 1 100 25 100 100 22 150 0 0 5 0.1 30 73 5 10000 0.22 ## 0 ratings and charact eristics curves (t a =25 w unless otherwise noted) fig. 1 - pulse derating curve fig. 2 - maximum non-repetitive surge current 1.0 2.0 3.0 4.0 5.0 steady state power dissipation, (w) 0 20 40 60 80 100 1 10 100 peak forward surge current, (a) number of cycles at 60 hz t j = t j max. 8.3 ms single half sine-wave 0 25 50 75 100 0 25 50 75 100 125 150 175 200 peak pulse derating in percentage of peak power or current, (%) ambient temperature ,t a ( w) 1 10 100 peak power (kw) 6 561 0 0 5111 81 0.2 100 6 561 0.5 76 3911 51 1 50 6 561 1.5 33 3611 8 2 23 6 561 3 13 3111 21 4 10 fig. 5 - pulse waveform fig. 6 - typical junction capacitance fig. 3 - steady state power derating curve fig. 4 - peak pulse power rating curve 1 10 100 1000 10000 1 10 100 1000 junction capacitance,c j (pf) reverse breakdown voltage,v br (v) bi-directional @v rwm uni-directional @v rwm t j =25 c f=1.0mhz 0.0 0 25 50 75 100 125 150 175 200 lead temperature , t l ( w) 0 50 100 0 1 2 3 4 peak pulse current , (% ) time , (ms) t j = 25 c pulse width (td) is defined as the point where the peak current decays to 50 % of ipp 10/1000 sec. waveform as defined by r.e.a. peak value (ipp) half value = ipp 2 td tr=10 s bi-directional @zero bias uni-directional @zero bias 0.1 0.1 1 10 100 1000 10000 pulse width ,t d ( s)
|
